P.O. Box 754 Lancaster, OH 43130 (614) 439-4039 |
5890 Wireless PIR Motion Detector 40' x 56' coverage
The ASC Edge:
Every Ademco Wireless Sensor contains a serial number that is as distinctive as a fingerprint--over one million different serial numbers are possible. This unique "fingerprint" serves two purposes: 1. The location of an intruder within the area protected by an alarm system can be identified at both the control panel and the central station. 2. Wireless signals easily penetrate walls and can travel over a hundred feet. Neighboring installations, which may use similar wireless systems, can receive these signals as well as the desired receiver. However, due to the uniqueness of each Point ID, it is virtually impossible for any peripheral in the neighboring system to have the same serial number.
5890 Specifications: Detection Method Passive infrared Coverage Standard Lens 40' x 56' (12m x 17m)
Detection Pattern 18 zones, (9 long, 5 intermediate, 4 short range) (standard lens) Pulse Count Installer-selectable, 1- or 2-event Detectable Walk Rate 0.5-5 ft/sec (.15-1.5m/sec) Mounting 7' (2.1m), nominal Indicators Red LED with enable/disable link Input Voltage Two 3V Lithium batteries--use only Ademco No. 466, Duracell DL123A, Panasonic CR123A, or Sanyo CR123A Operating Temp 32º to 122ºF (0ºC to 50ºC) Operating Humidity Up to 95 RH (max.), non-condensing Dimensions 2/" W x 4/4" H x 1/" D
Accessories: 466: 3V Lithium replacement battery (2 required per unit) 199PA: Pet alley lens 199LR: Long range lens How to Order: 5890--Wireless PIR Motion Detector. Includes two 3V lithium batteries and masking labels for standard lens 466--3V Lithium replacement battery (2 required per unit) 199PA--Pet alley lens 199LR--Long range lens |
|