Castle Communication Technologies

P.O. Box 754        Lancaster, OH        43130        (614) 439-4039

NetMechanic Star Performer AwardChecked by NetMechanic

 

998    

Recess Mount PIR Motion Detector'
Attractive styling
Fits single gang box or can be recessed into wall
Built-in "Signature Analysis" pulse count reduces false alarms
Horizontal and vertical adjustment
Excellent RFI immunity
SMD construction
6 year over-the-counter warranty

 

1 The ASC Edge:

Superior RFI Test Methods

The Radio Frequency Interference (RFI) test method used by Ademco's Quality Assurance department is superior to the methods used by most other manufacturers.

A Transverse Electromagnetic (TEM) cell used by most other manufacturers is a small chamber in which products are placed and then irradiated with RF energy at an established level to try to induce a false alarm. Unfortunately, TEM cells are susceptible to standing waves and other phenomena which have a tendency to overstate the level of immunity.

Ademco uses a full-size, shielded RF chamber that more realistically emulates real world conditions. To maintain high accuracy, the chamber is calibrated to the desired RF energy level at every test frequency prior to running each test. Comparison tests between and Ademco's full-size chamber and a TEM cell have shown that an immunity of 10V/m in Ademco's chamber corresponds to an immunity of 20-30V/m in a TEM cell.

 

 998 Specifications:

Detection Method Passive infrared

 Coverage 40' x 56' (12.2m x 17m)
(with standard wide angle lens)
70' x 8.4' (21.3m x 2.6m)
(with optional long range lens 995LR)
40' x 56' (12.2m x 17m)
(with optional pet alley lens 995PA)

Detection Pattern 12 zones (7 long range, 4 intermediate, 1 short range)

 Pulse Count Installer-selectable, 1- or 2-event

Detectable Walk Rate 0.5-5 ft/sec (.15-1.5m/sec)

 Mounting 7' (2.1m), nominal

 Indicators Red LED with enable/disable link

 Alarm Relay Form A, N.C., 0.13A max. contact rating @ 28V DC. 15-ohm internal resistor in series

Input Voltage 12VDC nominal (voltage reversal makes PIR inoperative)

Current 15 mA

Operating Temp 32º to 122ºF (0º to 50ºC)

Operating Humidity Up to 95 RH (max.), non-condensing

 Dimensions 2.75"W x 4.53" H x 0.8"D
(70mm x 115mm x 20mm)

 Accessories:  

995LR: Long range lens for 995

 995PA: Pet alley lens for 995

 How to Order:  

995--Recessed Mount PIR Motion Detector. Includes lens masking labels, plug-in wiring harness,
color matched mounting hardware

 995LR--Long range lens

995PA--Pet alley lens

 

MONITORING FOR YOUR ALARM SYSTEM AS LOW AS $ 12.50 PER MONTH!

Contact the webmaster by E-mail