Castle Communication Technologies

P.O. Box 754        Lancaster, OH        43130        (614) 439-4039

997  
Ceiling Mount PIR Motion Detector

360º look down capability
8'-12' mounting height
Twist-off cover for easy removal
Locally & remotely controllable walk test LED
SMD technology
6 year over-the-counter warranty

The ASC Edge:
Automated SMD Construction on the Flex Lines

Ademco has been a pioneer in the use of Surface Mount Device (SMD) construction in the security industry. Starting with surface mount passive components like resistors and capacitors, then moving to integrated circuits like amplifiers, now even sophisticated microprocessors are surface mounted on Ademco's Flexible Manufacturing Lines. All Ademco motion detectors, fabricated using automated SMD construction, provide you and your customers with major benefits:

 1. Higher Reliability: Each component is located precisely by robotic cameras and each solder connection is carefully controlled by computer.

 2. Fewer "out-of-the-box" problems: Because the components are automatically selected and placed properly on the PCB, there is virtually no opportunity for error in the fabrication process.

 3. Improved RF Immunity: SMD components have no leads that could act as miniature antennas where absorbing even a minute amount of RF energy can lead to false alarms in high gain circuits such as PIR motion detectors.

997 Specifications:

Detection Method Passive infrared

 Coverage 23' (7m) diameter @ 8' (2.4m) height
11.5' (3.5m) radius
36' (11m) diameter @ 12' (3.7m) height,
18' (5.5m) radius

 Detection Pattern 30 zones (12 outer, 12 middle, 6 inner, 1 center)

Pulse Count Installer-selectable, 1- or 2-event

Detectable Walk Rate 0.5-5 ft/sec (.15-1.5m/sec)

Mounting 12' (3.7m) maximum

 Indicators Red LED with enable/disable feature

Alarm Relay Form A, N.C., 0.5A max. contact rating @ 30VDC. Reed relay, 15 ohm
protective resistor

Input Voltage 12VDC nominal (voltage reversal makes PIR inoperative)

Current 17 mA

Operating Temp 32º to 122ºF (0º to 50ºC)

 Operating Humidity Up to 95 RH (max.), non-condensing

Dimensions 3/diameter x 1"high
(89mm diameter x 25.4mm high)

How to Order:

997--Ceiling Mount PIR Motion Detector. Includes lens masking labels PIR Pattern

MONITORING FOR YOUR ALARM SYSTEM AS LOW AS $ 12.50 PER MONTH!

Contact the webmaster by E-mail